Hayward® SV series PVC Solenoid Valves
Hayward's SV series solenoid valves are used to control flow rate, the valve remains in the closed position until electrically actuated. The valve bodies are a two port design, having one inlet and one outlet. They are available in ½" to 1" sizes.
The valve bodies are available in either PVC or CPVC and either can have EPDM or FPM seals.
Available voltages include 12VAC, 24VAC, 110VAC, 220VAC, 12VDC and 24VDC.
Best results are received when the inlet pressure is <120 PSI and the flow velocity is ≤ 5 FPS. The formula for calculating flow velocity is (GPMx0.4085)/ID2. Where GPM is flow rate (gallons per minute) and the ID is expressed in inches.
All non-alloy wetted materials
Designed for continuous-duty applications
The coil is housed in a corrosion-resistant polyester material
Differential pressure is not required for operation
The electrical connection is compatible with both 1/2" conduit and SJ-type cord
Normally closed design
Rated for pressures up to 150 PSI at 70F
Download Hayward’s complete Engineering Product Guide for additional selection criteria, such as flow coefficient values, water hammer calculations and other technical formulas.
Use the navigation menu above to compare pricing, note the part number and call, email or fax your order!
Threaded connections are NPT (American Standard) tapered pipe threads and it is suggested that a non-petroleum based sealant such as PTFE (Teflon™) plumbers tape is applied to your inlet/outlet pipe connections.
If you are not sure which diaphragm valve is most appropriate for your application, send us an inquiry, we typically reply quickly, certainly within 24 hours.